Broken Lamp Fixture: Accident leads to the death of a crew member

Posted by admin on March 5, 2010 under ISM Code | Comments are off for this article

The United States Coast Guard has issued a Safety Alert headed ‘Marine Investigations Lessons Learned 03-10′.

This safety alert serves as a reminder to vessel owners/operators, port captains/engineers, crewmembers, and marine inspection personnel of the importance of properly maintaining and repairing vessel electrical systems including those located in inaccessible or confined areas. In this casualty, a young mariner employed onboard a Great Lakes bulk carrier was electrocuted while working in a dark and confined cargo tunnel beneath the ship’s cargo holds. Another crewmember discovered the fallen mariner, went to his aid and received an electric shock sustaining a serious injury.

The investigation of this incident revealed that both crewmembers’ heads had contacted a broken lamp fixture. The fixture lacked a light bulb, a globe, and a guard. It appears that, at one time the fixture was separated from its connection box and a repair was made using electrical tape to cover some open wires without properly replacing the connecting fitting between the fixture and the box. It also appears that the connection box was ungrounded due to the use of tie wraps instead of solid metal fasteners.

The following link to the original Safety Alert shows a photo clearly illustrating the material condition of this fixture:  USCGSafetyAlert03-10.pdf

This dangerous latent unsafe condition existed until the crewmember brushed his head against it and was killed. Likewise, the second mariner also brushed his head upon the fixture as he was responding to his fallen shipmate and received an electric shock. Fortunately, he survived.

All crew members must do their best to ensure their safety as well as the safety of their co-workers by reporting and acting to correct unsafe conditions. Furthermore, it is critical that vessel and shoreside management personnel establish and maintain effective programmes where unsafe conditions like this one can be reported, acted on, and effectively managed. Employees must not be hindered from, or retaliated against, for reporting and documenting such concerns. These principles have been widely adopted in maritime and other industries as Safety Management Systems.

Eliminating unsafe conditions also makes good business sense. The associated post accident costs to the owner/operator can potentially be very substantial. Further, there’s a societal cost to deaths and injuries caused by these casualties that can’t be fully measured. Ultimately, no lengthy cost benefit analysis was needed in this case as the issue was very clear. A hazardous condition was found but the repair was grossly inadequate and didn’t eliminate the unsafe condition.

As a result of this casualty, the Coast Guard strongly recommends to vessel owners/operators, port captains/engineers, crewmembers, and marine inspection personnel, especially those associated with older vessels, to be alert for such hazards and to take immediate action to report, properly document and correct any hazardous condition.